Other Viewing Options; Using Aquos Link - Sharp AQUOS LC-80LE642U Operation Manual

Other Viewing Options
@o= _ • = o - =e 0 o = 1
2 To operate the connected equipment, press STB,
DVDoVCR or AUDIO to select your device. (STB
(cable/satellite set top box), BD, DVD, VCR or
AUDIO,) The remote control unit button will function
as follows,
®When you operate VCR, DVD or BD, press INPUT
to select the terminal connected to your device.
® CABLE and SAT cannot be selected at the same
time,
@@@
@@@
@@@
POWER (SOURCE)
• Turns tile connected equipment power on and off.
• Starts playback. (VCR, BD, DVD)
3 _4
• Rewinds the tape and allows picture search. (VCR)
, Hold down to go in reverse. (BD, DVD)
4m
• Stops the tape transport. (VCR)
• Playback stops when pressed. With some Blu-ray
disc/DVD players, pressing the button twice may
open the disc tray. (BD, DVD)
• Pressing quickly once takes you to the start of the
chapter currently playing. Each time you press
it, you move back to the start of the previous
chapter. (BD, DVD)
6 0-9, • (DOT)
• Press a button (or buttons) that corresponds to
the channel that you wish to watch.(STB)
7 _1_
• Rapidly advances the tape and allows picture search.
(VOR)
, Hold down to fast forward. (BD, DVD)
s||
• Sets pauses and still pictures. (VCR, BD, DVD)
• Pressing quickly once takes you to the start of the
next chapter. Each time you press it, you move
ahead to the start of the next chapter. (BD, DVD)
10 OREC
° Starts recording. (VCR)
11 FLASHBACK
• Press to switch between the current channel
and the channel you were watching immediately
before. Some manufacturers do not preset
FLASHBACK. (STB)
12 CHA/V
• Press CHA or CH v to tune in to a higher or
lower channel. (STB)
• Press to select the channel of the TV tuner on the
VOR. (VOR)
13 MENU
• When this button is pressed, the BD/DVD menu
will display. (BD, DVD)
14 A/_'/4/_, ENTER
• A/V/41/I_: Press the button to select kems on
the STB GUIDE screen or STB MENU screen.
(STB)
Press the button to select items on the BD/DVD
menu screen. (BD, DVD)
• ENTER: Press to activate the selected function.
(STB, BD, DVD)
Using AQUOS LINK
What's AQUOS LINK?
• Using the HDMI CEC (Consumer Electronics Control) protocol, with AQUOS LiNK you can interactively operate
compatible system equipment (Blu-ray disc equipment, AV amplifier, DVD).
• By connecting AQUOS LINK-compatible devices with HDMI-certified cables to the TV, you can control a recorder or
AV amplifier using the remote control of the TV.
• AQUOS LiNK allows you to operate the HDMI-connected equipment wRh one remote control.
Example
HDMI certified cable
Back panel Back panel
AQUOS BD player horizontal inputs vertical inputs
AQUOS LINK-compatible
audio system
• For connecting the TV to AQUOS LINK-compatible equipment, use commercially available cables.
• Point the remote control toward the TV, not to connected HDMI equipment.
• Video noise may occur depending on the type of HDMI cable used. Make sure to use an HDMI-certified cable.
• Up to 3 pieces of HDMI recording equipment and one AV amplifier can be connected using this system.
• These operations affect the HDMI equipment selected as the current input source. If the equipment does not
operate, turn on the equipment and select the appropriate input source using INPUT.
• The AQUOS LiNK feature may not operate properly when an HDMI splitter or AV selector unR is used. These devices
may cause interruptions to the image and/or sound.
Connected AQUOS LINK-compatible devices can be operated without changing the settings of the remote control
unit.
The OPTION button will function only when AQUOS LiNK is used.
[] One Touch Play
While the TV is in standby mode, it automatically turns on and plays back the image from the HDMI source.
[] One Touch Recording
Press OREC while you are viewklg a broadcast received with the AQUOS LINK-compatible recorder. The AQUOS
LiNK automatically recognizes the connected HDMI device and starts recording.
[] Single remote control
The AQUOS LiNK automatically recognizes the connected HDMI device and you can control the TV and the devices
as if using a universal remote control.
[] Control the AQUOS LINK-compatible audio system
Set the volume of AQUOS LiNK-compatible audio system.
• The above description is an example of the AQUOS LiNK function.
• The steps in "AQUOS LiNK Setup" on page 37 need to be completed beforehand.
• Refer to this operation manual and the operation manual of the AQUOS LiNK device to be used with this TV.
(D" 36