Sharp AQUOS LC-80LE642U Operation Manual page 31

On-Screen Display Menu
2 Press A/Y on the Manual Update screen to
select "USB Update", and then press ENTER.
3 Press ENTER to start checking the data in the
USB memory device.
5 To update the IV software with the update file,
select "Yes", and then press ENTER,
7 After the screen shown below is displayed, press
ENTER.
8 Remove the USB memory device,
4 During the data checking, "Checking" blinks,
• The current version of the TV software and the
version of the update file on the USB memory
device are displayed.
Example
• If the USB memory device is not properly installed
or the correct update file cannot be found on
the USB memory device, an error message is
displayed.
Check the file on the USB memory device, and
then reinsert the USB memory device correctly.
1!
Example
• Do not remove the USB memory device or unplug
the AC cord while the software is being updated.
6 When the software is successfully updated, a
screen is displayed indicating that the update
process is completed,
After this screen is displayed, the IV
automatically turns off and then turns on again,
Example
• If the update has failed, check the file in the USB
memory device and try Software Update again.
Q_)- 29