Sharp AQUOS LC-80LE642U Operation Manual page 26

On-Screen Display Menu
= a = o e
Power control setting allows you to save energy.
• For operating the on-screen display menu, see page 20.
When listening to music from a music program, you
carl turn the screen off and enjoy audio only.
• The screen image will return to normal when a button
(except those for audio adjustment, such as VOL,
MUTE) is pressed.
This function allows you to set the Power Saving
level in order to decrease the power consumption
and increase the backlight lifespan.
Standard: Optimizes power reduction based upon
video content. When set to "Standard", "_"
appears on the screen.
Advanced: Optimizes power reduction based upon
video content and engages OPC. When set to
"Advanced",
"_" appears on the screen.
Off: This function does not work.
• "Power Saving" does not function when you set AV
MODE to "AUTO" or "DYNAMIC (Fixed)".
• You cannot select a different Power Saving Rein for
each AV MODE.
When "Power Saving" is set, the "OPC" settings for all
AV Modes will automatically change.
--If you set "OPC" to "On" when "Power Saving" is set
to "Standard", then the "Power Saving" setting will
change to "Advanced".
--When you change the "Power Saving" setting from
"Advanced" to "Off" or to "Standard", "OPC" will be
set to "Off".
--"AUTO" and "DYNAMIC (Fixed)" will remain set to
"Off".
• When "Power Saving" is set to "Standard" or
"Advanced", the Power Saving leaf icon appears to the
left of "OPC" in the Picture Settings menu screen.
When this function is enabled, the 'f_/automatically
shuts down if no signal is received for more than 15
minutes.
• When it is 5 minutes before the power shuts down,
the remaining time will start to keep appearing every
minute.
• When a TV program finishes, this function may not
operate.
When you enable this function, the -iM automatically
shuts down if no operation is performed for more
than 3 hours.
• When it is 5 minutes before the power shuts down,
the remaining time will start to keep appearing every
minute.
= 0 • e
• For operating the on-screen display menu, see page 20.
These functions are useful for adjusting the audio
and video settings. The View Option functions can
be operated with the remote control unit.
The application window can be displayed by
selecting "APPS" on the MENU screen.
• You can display the application window by pressing
SmartOentral on the remote control unit. (See page
16.)
This function changes the screen size.
Select "View Option" on the menu to display the
View Mode menu screen.
The View Mode menu varies depending on the input
source.
• You can select View Mode by pressing VIEW MODE
on the remote control unR.
-- See pages 18 and 19 for adjusting the video being
input from a TV, other audiovisual equipment, USB-
Video, DLNA-Video or Intemet applications.
-- See page 19 for adjusting the video being input from
a PC.
iiiii ¸_i_i_i_ii!_!_!_!_!_!_!_!_!_!_!_!_!_!_!_!_!_!_!_!_!_!_!_!_!_!_!_!_!_!_!_!_!_!_!_!_!_!_!_!_!_!_!_ II !!i_i{ii_i_i_i_i_i_iiiiiiil;_ii
Allows you to capture and freeze a moving image
that you are watching.
• You can select Freeze by pressing FREEZE on the
remote control unit. See page 16 for details of Freeze
function.
ii!i!i!_!i_{_i_i_ii_ii_ii_i_{iii{_ ;i!_i_!! _!_!_!_i;i!i!_i_!!i!i!i!i!i!i!i!i!i!i!i!i!i!i!
Allows you to change the Closed Caption display.
Select "Change CC" on the menu to display the
Closed Caption information.
° The information displayed varies depending on the
program you are watching.
* You can change Closed Caption by pressing CO on
the remote control unit. See page 18 for details of
Closed Caption function.
You can output digital audio to an AV amplifier or
similar device whose DIGITAL AUDIO INPUT terminal is
connected to the DIGITAL AUDK) OUT terminal on the
TV. Please select an audio output format compatible with
the audio format of the program you are watching and
the equipment connected.
POM: For connecting to equipment that does not
support Dolby Digital and DTS. The same audio
(main, sub, or main/sub) as the audio of the
program being viewed is output.
2-channel audio wRh a sampling rate of 48 kHz or
less is output as linear PCM audio.
Bitstream: For connecting to an audio system that
supports Dolby Digital and DTS. Audio is output
through both the main and sub channels.
* Analog channel audio and video input audio are output
in PCM mode even when "BRstream" is selected.
* PCM digital input signals are output in PCM mode
even when "Bitstream" is selected.
This setting allows you to skip the lM, HDMI or PC
IN Input ("/_/", "PC IN", "HDMI 1", "HDMI 2", "HDMI
3" and "HDMI 4") on the Input Selection operation.
* If you connect external equipment to an HDMI terminal
which you have set to be skipped, a notification
message appears on the display when a signal is
received from the connected external equipment.
Press "Yes" to reset the related skipping setting so that
the input terminal becomes available.
• You can change Audio by pressing AUDIO on the
remote control unit. See page 17 for details of Audio
function.
(_- 24