Sleep Timer; Av Mode - Sharp AQUOS LC-80LE642U Operation Manual

Direct Button Operation
Displays the Netfiix screen,
Press NETFL(X,
• To enjoy Netfiix, you need to make:
--a broadband Interact connection (See page 41.)
--settings of Intemet Setup (See pages 41 to 42.)
--adjustments for Netfiix (See page 44.)
m MTS/SAP stereo mode
The -iM has a feature that allows reception of sound
other than the main audio for the program. This
fgature is called Mu(ti-channel [elevision Sound
(MTS). The R/with MTS carl receive mono sound,
stereo sound and Secondary Audio Programs (SAP).
The SAP feature allows a lM staUon to broadcast
other information, which could be audio in another
language or something completely different like
weather information.
You can enjoy Hi-Fi stereo sound or SAP
broadcasts where available.
• Stereo broadcasts: View programs like live sportklg
events, shows and concerts in dynamic stereo sound.
• SAP broadcasts: Receive TV broadcasts in either
MAIN or SAP sound.
MAiN sound: The normal program soundtrack (either in
mono or stereo).
SAP sound: Listen to a second language,
supplementary commentary or other information. (SAP
is mono sound.)
(f stereo sound is difficult to hear.
• Obtain a clearer sound by manually switching to fixed
mono-sound mode.
You can change MTS as shown below to match the
television broadcast signal.
Press AUDIO to toggle between audio modes.
The types of audio transmitted in a digita( broadcast
include SURROUND as well as MONO and STEREO.
In addition, it is possible for multiple audio tracks to
accompany a single video track.
Press ENTER to toggle between audio modes.
Example: when receiving Digital broadcasting
STEREO (Audio1) m STEREO (Audio2)
t..... SURROUND (Audio3)',---.ll
• MTS only operates while in TV mode.
• You can have the same settings by choosing "Change
Audio" on the menu items. (See page 24.)
Allows you to set a time when the TM automatically
switches to standby,
Press SLEEP,
• The remaining time displays when the sleep timer has
been set.
• Each time you press SLEEP, the remaining time
switches as shown below.
off m 30,m 60 m_ 90 m_ 120
if m
• When set, the time automatically starts counting down.
• If you want to adjust the sleep timer, you can press
SLEEP twice then change the time setting.
• When it is 5 minutes before the time expires, the
remaining time will start to keep appearing every minute.
o Select "Off" by pressing SLEEP to cancel the sleep timer.
• The TV will enter standby when the remaining time
reaches 0.
AV MODE gives you several viewing options
to choose from to best match the surrounding
environment of the R/, which can vary due to factors
like roorn brightness, type of program watched or
the type of device connected.
You can use USER Mode to create customized
settings for each (_/input. These settings will be
automatically saved on each input for convenience.
Press AV MODE, Current AV MODE displays.
• Press AV MODE again before the mode displayed on
the screen disappears. The mode changes as shown
below:
• Example:
When using the COMPONENT,
VIDEO i or 2 terminals
AUTO m STANDARD (ENERGY STAR) m MOVIE
I 1
DYNAMIC (Fixed) _ DYNAMIC _ USER [TV] _,_ GAME
• Example:
When using the PC IN or HDMI t to 4 terminals
AUTO m STANDARD (ENERGY STAR) m MOVIE
I 1
DYNAMIC (Fixed) GAME
I 1
DYNAMIC _ USER[.aP] m PC
AUTO: Optimizes the image qualky automatically
based on the room brightness and image signal.
STANDARD (ENERGY STAR}: For a highly defined
image in a normal lightklg.
MOVIE: For a movie.
GAME: Lowers image brightness for easier viewing.
PC: For PC.
USER: Allows the user to customize settings as desired.
You can set the mode for each input source.
DYNAMIC: For a clear-cut image emphasizing high
contrast, useful for sports viewing.
DYNAMIC (Fixed}: Changes the image and
sound settings to the factory preset values. No
adjustments are allowed.
Examples: when receiving MTS and SAP
STEREO mode: STEREO_ MONO
STEREO + SAP mode: ST(SAP)_ SAP(STem MONO
t !
MAiN + SAP mode: MAIN_ SAP
MONO mode: MONO
m Digital broadcasting audio mode
• You can select a different AV MODE kern for each
input mode. (For example, select STANDARD (ENERGY
STAR) for TV input and DYNAMIC for COMPONENT.)
• When you play games, "GAME" is recommended for
AV MODE.
• You cannot set "PC" when the TV is connected to the
Intemet.
• You cannot set "GAME" or "PC" when the input source
is "Home Network (DLNA)" or "USB".
• You can have the same settings by choosing "AV
MODE" on the menu items. (See page 22.)
(D" 17