Using The Adf - Lexmark X215 MFP User Manual

Using the ADF

You can copy up to 30 documents (20 lb, 75 g/m
When you use the ADF:
• Do not load documents smaller than 142 x 148 mm (5.5 x 5.83 in.) or larger than 216 x 356
mm (8.5 x 14 in.).
• Do not attempt to feed the following types of documents:
– Carbon-paper or carbon-backed paper
– Coated paper
– Onion skin or thin paper
– Wrinkled, creased, curled, rolled, or torn paper
• Remove all staples and paper clips before loading documents.
• Make sure any glue, ink, or correction fluid on the paper is completely dry before loading
documents.
• Do not load documents containing different sizes or weights of paper.
If you want to make copies from booklets, pamphlets, transparencies, or documents with other
unusual characteristics, use the scanning bed. For help, see page 42.
1
Load the document (up to 30 pages) faceup into the ADF and adjust the document guides to
the document size.
Note: Letter and A4 sized paper should align to the corresponding registration marks on
the paper guide. Legal-sized paper extends beyond the edge of the guide.
2
Customize any copy settings you want to change. For help, see page 45.
2
) using the ADF.
Using the ADF
44