Clearing Display Messages - Lexmark X215 MFP User Manual

Clearing display messages

Display
Cancel?
COMM. ERROR
Function Impossible
Group not available
Line Busy
LINE ERROR
Memory Full
No answer
Not Assigned
Operation Not Assigned
Retry Redial?
Stop pressed
Meaning
The memory is full and unable to
store all the pages of the
document.
Facsimile communication problem
has occurred.
You have tried to use a
combination of machine functions
that cannot be used at the same
time.
You have tried to select a group
location number where only a
single location number can be
used, such as when adding
locations for a broadcasting
operation.
The remote party did not answer or
the line is already engaged.
Cannot connect with the remote
machine, or lost contact because
of a problem with the phone line.
The memory is full.
The remote fax machine has not
answered after several redial
attempts.
The shortcut location has no
number assigned to it.
You attempted to perform an
unsupported operation.
Awaiting a specified time interval
to redial a previously busy station.
The Stop/Clear button is pressed
during transmission.
Clearing display messages
60
Solutions
To cancel the fax job, press 1 (for
Yes).
If you want to send the pages that
were stored, press 2 (for No).
Note: You should send the
remaining pages later when
memory is available.
Ask the sender to resend the fax.
Reduce the number of selected
functions or use only one function
at a time.
Use a shortcut number or dial a
number manually using the
numeric keypad.
Resend the fax. If the problem
persists, wait for the line to clear,
and then resend the fax again.
Resend the fax. If the problem
persists, wait for the line to clear,
and then resend the fax again.
Or, turn the ECM mode on.
Delete unnecessary documents,
retransmit after more memory
becomes available, or divide the
transmission into multiple jobs.
Resend the fax. Make sure that the
remote machine is operational.
Dial the number manually using
the numeric keypad or assign the
number. See "Creating a shortcut"
on page 56.
Wait for the machine to redial after
the specified time interval has
passed, press Select to
immediately redial, or Stop/Clear
to cancel the redial operation.
Resend the fax.