Kenwood CK 405 G Instructions For Use - Installation Advice page 39

GRILL BURNER (Left oven only)
• Unscrew and remove the burner securing screw "A" (fig. 10.9).
• Withdraw the burner as shown in figure 3.9. Take care not to damage the safety valve
probe and the electric ignition electrode.
• Using a 7 mm box spanner, unscrew the injector (indicated by the arrow in fig. 10.10)
and replace it with a new one selected in accordance with the "Table for the choice of
the injectors".
• Regulate the air supply to the grill burner as indicated in the section "REGULATION OF
AIR SUPPLY TO OVEN AND GRILL BURNERS"; then replace the burner repeating
the above steps in reverse order.

IMPORTANT: Check the correct operation of the safety valve and the electric
ignition.
A
Fig. 10.9
Fig. 10.10
39