The Anti-Spam White List Screen - ZyXEL Communications ZyWall USG 2000 User Manual

Unified security gateway

Hide thumbs Also See for ZyWall USG 2000:

Table of Contents

38.5 The Anti-Spam White List Screen

Click Configuration > Anti-X > Anti-Spam > Black/White List and then the

White List tab to display the Anti-Spam White List screen.

Configure the white list to identify legitimate e-mail. You can create white list

entries based on the sender's or relay's IP address or e-mail address. You can also

create entries that check for particular header fields and values or specific subject

Figure 446 Configuration > Anti-X > Anti-Spam > Black/White List > White List

The following table describes the labels in this screen.

Table 179 Configuration > Anti-X > Anti-Spam > Black/White List > White List

General Settings

Enable White List

Rule Summary

ZyWALL USG 2000 User's Guide

Select this check box to have the ZyWALL forward e-mail that

matches (an active) white list entry without doing any more anti-

spam checking on that individual e-mail.

Click this to create a new entry. See

Select an entry and click this to be able to modify it. See

38.4.1 on page 665

for details.

Select an entry and click this to delete it.

To turn on an entry, select it and click Activate.

To turn off an entry, select it and click Inactivate.

The activate (light bulb) icon is lit when the entry is active and

dimmed when the entry is inactive.

This is the entry's index number in the list.

Chapter 38 Anti-Spam

Section 38.4.1 on page 665