ZyXEL Communications ZyWall USG 2000 User Manual page 169

Set the Device Role to Master. This example focuses on the connection from the
3
LAN (ge1) to the Internet through the ge2 interface, so select the ge1 and ge2
interfaces and click Activate. Enter a Synchronization Password
("mySyncPassword" in this example) and click Apply.
Figure 131 Configuration > Device HA > Active-Passive Mode: Master ZyWALL
Example
Click the General tab. Turn on device HA and click Apply.
4
Figure 132 Configuration > Device HA > General: Master ZyWALL Example
ZyWALL USG 2000 User's Guide
Chapter 7 Tutorials
169