ZyXEL Communications ZyWall USG 2000 User Manual page 980

Appendix A Log Descriptions
Table 295 Interface Logs (continued)
LOG MESSAGE
"Unable to negotiate
with the device in %s.
Please try to remove
then insert the
device.
"Unable to configure
the selected frequency
band to the device in
%s. Please try to
remove then insert the
device.
"PIN code is required
for inteface
cellular%d. Please
check the PIN code
setting.
"SIM card has been
successfully unlocked
by PUK code on
interface cellular%d.
"Incorrect PUK code of
interface cellular%d.
Please check the PUK
code setting.
"SIM card of interface
cellular%d in %s is
damaged or not
inserted. Please
remove the device,
then check the SIM
card.
"SIM card of interface
cellular%d in %s is
locked. Please enter
PUK code to unlock.
"Incorrect PIN code of
interface cellular%d.
Please check the PIN
code setting.
"Unable to query the
signal quality from
the device in %s.
Please try to remove
then insert the
device.
"Interface cellular%d
cannot connect to the
service provider.
"Interface cellular%d
is configured with
incorrect APN.
980
DESCRIPTION
The ZyWALL could not negotiate with the cellular device
installed in (or connected to) the listed slot (%s). Remove
and reinstall the device.
The ZyWALL failed to set the cellular device installed in (or
connected to) the listed slot (%s) to use the frequency band
you configured. The cellular device may not support the band
or you may need to try removing and reinstalling the device.
The PIN code configured for the listed cellular interface (%d)
is incorrect or missing.
You entered the correct PUK code and unlocked the SIM card
for the cellular device associated with the listed cellular
interface (%d).
You entered an incorrect PUK code so you were not able to
unlock the SIM card for the cellular device associated with the
listed cellular interface (%d).
The SIM card for the cellular device associated with the listed
cellular interface (%d) cannot be detected. The SIM card may
be missing, not inserted properly, or damaged. Remove the
device and check its SIM card. If it does not appear to be
damaged, try re-inserting the SIM card.
The SIM card for the cellular device associated with the listed
cellular interface (%d) is locked. This may be because the PIN
code was entered incorrectly more than three ti m es. You need
to enter the PUK code to unlock the SIM card. .
The listed cellular interface (%d) does has the wrong PIN
code configured.
The ZyWALL could not check the signal strength for the listed
cellular interface (%d). This could be due to an error or being
out of range of the ISP's cellular station.
The listed cellular interface (%d) cannot connect to the ISP.
This could be due to an error or being out of range of the
ISP's cellular station.
The listed cellular interface (%d) does not have the correct
APN (Access Point Name) configured.
ZyWALL USG 2000 User's Guide