ZyXEL Communications ZyWall USG 2000 User Manual page 983

Table 295 Interface Logs (continued)
LOG MESSAGE
System default ppp
interface can not be
removed.
Interface property can
not change to internal
since interface is the
member of other trunk.
Port-grouping is not
support
This interface type
can not set 3rd-dns.
name=%s,status=%s,TxP
kts=%u,
RxPkts=%u,Colli.=%u,T
xB/s=%u,
RxB/s=%u,UpTime=%s
Interface %s has been
renamed from '%s' to
'%s '
Table 296 Account Logs
LOG MESSAGE
Account %s %s has been
deleted.
Account %s %s has been
changed.
Account %s %s has been
added.
Table 297 Port Grouping Logs
LOG MESSAGE
Interface %s links up
because of changing
Port Group. Enable
DHCP client.
Interface %s links
down because of
changing Port Group.
Disable DHCP client.
ZyWALL USG 2000 User's Guide
DESCRIPTION
A PPP interface could not be removed because it is a system
default PPP interface.
An interface can not be set to be an internal interface because
it is a member of a trunk.
The interface does not support port grouping.
This type of interface does not support setting a third DNS
server setting.
This log is sent to the VRPT server to show the specified PPP/
Cellular interface's statistics and uptime.
The arguments represent the interface name, interface
status, interface Tx packets, interface Rx packets, interface
collision packets, interface Tx Bytes/s, interface Rx Bytes/s,
and interface up time.
The user-configurable name of the specified interface
(internal system name) has been renamed from one name to
another.
DESCRIPTION
A user deleted an ISP account profile.
1st %s: profile type, 2nd %se: profile name.
A user changed an ISP account profile's options.
1st %s: profile type, 2nd %s: profile name.
A user added a new ISP account profile.
1st %s: profile type, 2nd %s: profile name.
DESCRIPTION
An administrator used port-grouping to assign a port to a
representative Interface and this representative interface is
set to DHCP client and only has one member. In this case the
DHCP client will be enabled. %s: interface name.
An administrator used port-grouping to assign a port to a
representative interface and this representative interface is
set to DHCP client and has no members in its group. In this
case the DHCP client will be disabled. %s: interface name.
Appendix A Log Descriptions
983