Starting Over In Windows 2000 Or Xp; Figure E-4: Hardware; Figure E-5: Device Manager - Cisco Linksys LNE100TX User Manual

EtherFast 10/100 LAN Card
10. Scroll down to the Other Devices listing. Click the plus sign. Remove PCI Ethernet Controller or PCI
Ethernet Adapter. (If Other Devices is not listed, proceed to the next step.)
11. Click the Close button, shut down Windows, and restart your computer.
12. After your computer has restarted, refer to the chapters for Windows 95, Windows 98 or Windows ME for
setup instructions.

Starting Over in Windows 2000 or XP

1. Click the Start button, choose Settings, choose Control Panel, then double-click the System icon. The
System Properties window will open.
2. Choose the Hardware tab, as shown in Figure E-4.
3. Click the Device Manager button. The Device Manager window will open.
4. Click the plus sign beside Network Adapters. The LNE100TX Fast Ethernet Adapter listing should appear.
5. Right-click on LNE100TX Fast Ethernet Adapter, as shown in Figure E-5. The following menu box should
open.
Appendix E: Starting over in Windows 95, 98, ME, 2000, or XP
Starting Over in Windows 2000 or XP

Figure E-4: Hardware

Figure E-5: Device Manager

50