Table of Contents
Advertisement
EtherFast 10/100 LAN Card
5. Highlight the Linksys LNE100TX(v5) Fast Ethernet Adapter entry in the window that appears, shown in
Figure 6-45. Click the OK button.
6. When NT asks you for the media type, choose the AutoSense option, as shown in Figure 6-46. When
finished, click the Continue button. Then, click the Close button.
7. If Windows NT asks you to supply your original Windows NT CD-ROM or setup disks, direct Windows NT to the
proper location (most likely D:\i386, where D represents the letter of your CD-ROM drive), as shown in Figure
6-47, and click Continue.
8. Remove any disks and click the Yes button to restart your PC. (See Figure 6-48.)
9. Once your PC has rebooted, double-click the Network Neighborhood icon on your desktop. Make sure that
you have access to the network. If you do, the Adapter has been properly installed.
The Windows NT Installation and Setup of the EtherFast®
Chapter 6: Manual Installation and Setup
Windows NT
10/100 LAN Card is complete.
Figure 6-45: Select OEM Option
Figure 6-46: Auto Sense
Figure 6-47: Windows NT Setup
Figure 6-48: Restart your Computer
31
Advertisement
Table of Contents
