Table of Contents
Advertisement
EtherFast 10/100 LAN Card
Chapter 3: Getting to Know the Etherfast 10/00 LAN Card
The Adapter's displays (LEDs) and connection (the RJ-45 Port), shown in Figure 3-1, are described in this chapter.
LEDs
100
Amber. The 100 LED will illuminate when the Adapter is operating at 100Mbps. If the 100 LED
is not illuminated and the PC is powered on, the Adapter is operating at 10Mbps.
Link/Act
Green. The Link LED will illuminate when the Adapter has been successfully connected to a
network and flicker when data is being transmitted or received over the network.
The RJ-45 Port
The RJ-45 Port is where you will connect the UTP Category 5 or better network cabling.
Chapter 3: Getting to Know the Etherfast 10/00 LAN Card
LEDs
Figure 3-1: Back Panel
6
Advertisement
Table of Contents
