Figure 6-25: Hardware Installation Complete; Figure 6-26: Configuration - Cisco Linksys LNE100TX User Manual

EtherFast 10/100 LAN Card
7. Windows ME will begin copying the EtherFast® 10/100 LAN Card's driver files onto your PC. If Windows ME
setup files are requested, click OK and direct Windows to the proper location, e.g.
C:\windows\options\install, or D:\win9x (where "D:" represents your CD-ROM drive).
8. If Windows asks you to supply any drivers beginning with "lne" or "netlne", re-direct Windows to your CD-
ROM drive (D:\).
9. Windows will finish installing the software onto your PC. (See Figure 6-25.) Click the Finish button.
10. When asked if you want to restart your PC, remove any disks from your PC and click the Yes button. If
Windows does not prompt you to restart, do so manually. Click the Start button, then click Shutdown.
Choose the Restart option and click the OK button.
Network Component Configuration
1. Once you are back at the Windows ME desktop, click on your taskbar's Start button, select Settings, then
Control Panel, and then double-click the Network icon.
2. The Network window will appear. Click on the Configuration tab. There may be other components listed in
addition to the ones shown in Figure 6-26 (for example, a Dial-up Adapter), which is normal. If any of the
components shown below are missing, however, you'll need to manually install them. Refer to Appendix E:
Manually Installing the Network Components in Windows 95, 98, and Millennium.
• Client for Microsoft Networks
• Dial-Up Adapter
• Linksys LNE100TX (v5) Fast Ethernet Adapter
• TCP/IP -> Dial-Up Adapter
• TCP/IP -> Linksys LNE100TX (v5) Fast Ethernet Adapter
Chapter 6: Manual Installation and Setup
Windows ME

Figure 6-25: Hardware Installation Complete

Figure 6-26: Configuration

23