Table of Contents
Advertisement
EtherFast 10/100 LAN Card
5. Select Specify a location and type D:\ in the drop-down box, shown in Figure 6-14. Then, click the Next
button.
6. The screen shown in Figure 6-15 will notify you that Windows is searching for the Linksys LNE100TX (v5) Fast
Ethernet Adapter driver. When the window the driver is ready to be installed, click the Next button.
7. Windows will begin copying the EtherFast 10/100 LAN Card's driver files to your PC. Refer to the chart below
to help guide you through the process
.
If your PC asks for the
1. Click OK.
Setup Utility CD
2. Verify that the Setup Utility CD is in your PC's CD-ROM drive.
3. Type d:\ in the "Copy files from:" box.
4. Click OK.
If you are asked to supply
1. Click OK.
your Windows 98 Instal-
2. If you have a Windows 98 CD-ROM, type d:\win98 in the "Copy files
lation Files or Disks
from:" box, where d: is your CD-ROM drive.
3. If you don't have a Windows 98 CD-ROM, type c:\win-
dows\options\cabs.
4. Click OK.
If you are asked for a file
1. Insert the Setup Utility CD into your PC's CD-ROM drive.
that includes "Netlnev" in
2. Type d:\Drivers\WIN98 in the "Copy files from:" box.
its name
3. Click OK.
If you receive a Version
1. Choose to keep the newest version of the file by clicking Yes
Conflict error
Chapter 6: Manual Installation and Setup
Windows 98
Table 2: Possible Prompts
Figure 6-14: Specify a Location
Figure 6-15: Location of Driver
17
Advertisement
Table of Contents
