Figure 6-3: Select Other Location; Figure 6-4: Driver Found - Cisco Linksys LNE100TX User Manual

EtherFast 10/100 LAN Card
3. Type the driver location, D:\, in the location field on the Select Other Location Screen, shown in Figure 6-3.
Then, click the OK button.
4. Windows will show that the files have been found. (See Figure 6-4.) Click the Finish button to continue. Then,
when you are prompted, verify that the LNE100TX Setup Utility CD is in your CD-ROM drive.
IMPORTANT: Do not press Skip or Cancel or the drivers will not be
installed!
If your PC asks for the 1. Click OK.
Setup Utility CD
2. Verify that the Setup Utility CD is in your PC's CD-ROM drive.
3. Type d:\ in the "Copy files from:" box.
4. Click OK.
If you are asked to supply 1. Click OK.
your Windows 95 Instal-
2. If you have a Windows 95 CD-ROM, type d:\win95 in the "Copy files
lation Files or Disks
from:" box, where d: is your CD-ROM drive.
3. If you don't have a Windows 95 CD-ROM, type c:\win-
dows\options\cabs.
4. Click OK.
If you are asked for a file 1. Insert the Setup Utility CD into your PC's CD-ROM drive.
that includes
2. Type d:\Drivers\WIN95 in the "Copy files from:" box.
"LNE100TX" in its name
3. Click OK.
If you receive a Version 1. Choose to keep the newest version of the file by clicking Yes
Conflict error
Chapter 6: Manual Installation and Setup
Windows 95
Table 1: Possible Prompts

Figure 6-3: Select Other Location

Figure 6-4: Driver Found

12