What's In This Guide - Cisco Linksys LNE100TX User Manual

EtherFast 10/100 LAN Card

What's in this Guide?

This user guide covers the steps for setting up and using the EtherFast® 10/100 LAN Card.
• Chapter 1: Introduction
This chapter describes the Card's applications and this User Guide.
• Chapter 2: Networking Basics
This chapter discusses a few of the basics about wireless networking.
• Chapter 3: Getting to Know the EtherFast® 10/100 LAN Card
This chapter describes the physical features of the Card.
• Chapter 4: Installing the PCI Card
This chapter shows you how to connect the Card to your PC.
• Chapter 5: Installing the Drivers with the Setup Utility
This chapter instructs you on how to use the Card's Setup Wizard and configure the Card.
• Chapter 6: Manual Installation and Setup
This chapter shows you how to manually set up the Card.
• Appendix A: Troubleshooting
This appendix describes some potential problems and solutions, as well as frequently asked questions,
regarding installation and use of the Card.
• Appendix B: Glossary
This appendix gives a brief glossary of terms frequently used in networking.
• Appendix C: Windows Help
This appendix describes how you can use Windows Help for instructions about networking, such as installing
the TCP/IP protocol.
• Appendix D: Windows 95, 98, ME, Client for a Windows NT or 2000 Domain Server
This appendix explains how to install the Card if you will be using a Windows NT or 2000 domain server
• Appendix E: Starting over in Windows 95, 98, ME, 2000, or XP
This appendix describes how to re-install the driver if you have installation difficulties.
• Appendix F: Manually Installing the Network Components in Windows 95, 98, and ME
This appendix explains how to install your Network Components.
Chapter 1: Introduction
What's in this Guide?
2