EtherFast 10/100 LAN Card
Refer to the Troubleshooting section if:
• You don't see anything at all in Network Neighborhood and have pressed the F5 key on your keyboard a few
times to refresh the screen.
• You only see your own computer in Network Neighborhood.
• You see all computers on the network except yours and have tried pressing the F5 key a few times.
• You only see computers that are running the same operating system as you and you don't see any others.
Windows 98
1. Start up your PC in Windows 98.
2. Windows 98 will automatically detect the presence of the Adapter in your PC.
3. Insert the LNE100TX Setup Utility CD into your CD-ROM drive while the Add New Hardware Wizard window,
shown in Figure 6-12, is visible. Click the Next button.
4. As shown in Figure 6-13, select Search for the best driver for your device (Recommended) and click the
Next button.
Chapter 6: Manual Installation and Setup
Windows 98
Figure 6-12: Searching for Drivers
Figure 6-13: Search for the Best Driver
16