Tray Mapping - Lexmark Optra K 1220 Installation And User Manual

Set the PAPER TYPE for the three trays as follows:
Tray 1 Type
Tray 2 Type
Tray 3 Type
The printer will feed paper from Tray 3 when Tray 2 is empty.

4.6.1 Tray Mapping

In the following an asterisk "*" indicates the default factory value. The default value
for each of these options is listed on the IPDS Print Menus page. See section 2.2
Printing the Menu Settings on page 13.
Note: Values which are not available on your printer will not be displayed.
Option name
Tray Mapping 1
Tray Mapping 2
Tray Mapping 3
Tray Mapping 4
= Colored Paper
= Plain Paper
= Plain Paper
Values
No Map, Tray 1*, Tray 2, Tray 3, Tray 4, Tray 5, MP Feeder,
Env Feeder, Manual Paper, Manual Env
IPDS Number 0*, 0 to 255
No Map, Tray 1, Tray 2*, Tray 3, Tray 4, Tray 5, MP Feeder,
Env Feeder, Manual Paper, Manual Env
IPDS Number 1*, 0 to 255
No Map, Tray 1, Tray 2, Tray 3*, Tray 4, Tray 5, MP Feeder,
Env Feeder, Manual Paper, Manual Env
IPDS Number 2*, 0 to 255
No Map, Tray 1, Tray 2, Tray 3, Tray 4*, Tray 5, MP Feeder,
Env Feeder, Manual Paper, Manual Env
IPDS Number 3*, 0 to 255
51