5.7 Printing IPDS from PSF/400 with OS/400
V3R7, V4R1, or V4R2
Install the latest cumulative PTF fix pack or tape for the system.
PTF 43310, which is available from IBM provides a fix for out of paper
responses from the printer.
1.
Set up and start the TCP/IP network:
Create a Token-Ring or an Ethernet line description for the printer
using CRTLINTRN or CRTLINETH.
Add a TCP/IP interface using ADDTCPIFC.
Add a router definition, if required, using ADDTCPRTE.
Start TCP/IP using STRTCP.
2.
Define a PSF configuration object for your printers using CRTPSFCFG. What you
define here is referenced in the printer device description (CRTDEVPRT). More
than one printer can use this object. See the example on page 88.
Note:
Only the required fields are listed below.
Type CRTPSFCFG and press <F4>. Enter the following information:
PSF configuration
(OPTRAPRT is a user defined name.)
IPDS pass through
Release timer
Text 'description'
(Optional)
PSFCFG
Library
IPDSPASTHR
RLSTMR
TEXT
OPTRAPRT
QGPL
*YES
*SEC15
'Optra Printer'
83