Trace Functions - Lexmark Optra K 1220 Installation And User Manual

4.3.15 Trace Functions

This option determines if the Trace function is enabled. Trace data is sent to either the
serial or parallel port. Unless you have a computer running a capture program attached
to the serial or parallel port to receive the trace data, the printer will hang Busy and
display IPDS on the first line of the operator panel and TRC on the second line of the
operator panel.
Note: The Trace function is used by service personnel for troubleshooting and
service.
Disable*
Serial Output
Parallel Output
Note: Some Optra models do not have a serial port standard on the printer. A Tri-
Port Adapter must be installed in printer option card slot one to perform
serial tracing on these models.
Disable Trace
Enable serial port for output of trace data
Enable parallel port for output of trace data
43