Printing A Network Setup Page; Printing A Font Sample List - Lexmark E350d User Manual

Printing a network setup pag e
If the printer is attached to a network, print a network setup page on the printer to verify the network connection. This page
also provides important information that helps in configuring for network printing.
1
Make sure the printer is on and Ready appears.
2
From the control panel, press
Standard Network appears.
3
Press , and then press
4
Press until Reports appears.
5
Press until Setup Page appears, and then press
Busy Network appears. The indicator light flashes, and the printer prints the page.
6
Press to return to the Ready state.
7
Check the first section on the network setup page, and confirm that Status is "Connected."
If Status is "Not Connected" the LAN drop may not be active, or the network cable may be malfunctioning. Consult
a system support person for a solution, and print another network setup page to verify that the printer is connected
to the network.

Printing a font sample list

To print samples of the fonts currently available for your printer:
1
Make sure the printer is on and Ready appears.
2
From the control panel, press
3
Press until Print Fonts appears.
4
Press until List appears.
The indicator light flashes, and the printer prints the pages.
5
Press to return to the Ready state.
Printing
until Network Menu appears, and then press
until Std Net Setup appears.
until Utilities Menu appears, and then press

Printing a network setup page

27
.
again.
.