Adding A Memory Card - Lexmark E350d User Manual

Adding a memory card

The system board has one connector for an optional memory card.
CAUTION:
unplug the power cord from the wall outlet before continuing.
Note: Memory options designed for other Lexmark printers may not work with your printer.
1
Access the system board (see Accessing the system board on page28 ).
2
Push open the latches on both ends of the memory
connector.
3
Unpack the memory card.
Warning: Memory is easily damaged by static electricity.
Touch something metal, such as the printer
frame, before you touch a memory card.
Avoid touching the connection points along the edge of the
card.
4
Align the notches on the bottom of the card with the notches
on the connector.
5
Push the memory card firmly into the connector until the
latches on either end of the connector snap into place.
It may require some force to fully seat the card.
6
Make sure each latch fits over the notch on each end of the
card.
7
Close the side access door.
8
Close the rear exit door .
9
Close the front door.
10
Plug the power cord into the wall outlet and turn the printer
on to continue print functions.
Installing options
If you are installing a memory card after setting up the printer, turn the printer off, and
Adding a memory card
31