Adding A Flash Memory Card - Lexmark E350d User Manual

Adding a flash memory card

CAUTION:
off, and unplug the power cord from the wall outlet before continuing.
Note: Flash memory card options designed for other Lexmark printers may not work with your printer.
1
Access the system board (see Accessing the system
board on page28 ).
2 Unpack the flash memory card.
Note: There are two sets of holes on the system
board for flash memory card installation.
The flash memory card may be installed into
either set of holes, however, only one flash
memory card may be installed.
Warning: Flash memory is easily damaged by static
electricity. Touch something metal, such as
the printer frame, before you touch a flash
memory card.
Avoid touching the metal connection points on the connector.
3
Squeeze the retainers, and align the plastic pins on the flash memory card with the holes on the system board.
4
Push the flash memory card firmly into the holes of the system board until it snaps into place.
5
Close the side access door.
6
Close the rear exit door.
7
Close the front door.
8
Plug the power cord into the wall outlet and turn the printer on to continue print functions.
Installing options
If you are installing a flash memory card after setting up the printer, turn the printer
Adding a flash memory card
32