Lexmark E350d User Manual page 57

Problem
Part or all of the page is
printed in black.
The job prints, but the
top and side margins are
incorrect.
Ghost images appear.
Gray background prints.
Some of the print is cut
off on the sides, top, or
bottom of the print
media.
Print is skewed or
inappropriately slanted.
Transparency print
quality is poor.
Troubleshooting
Action
Check the photoconductor kit to see if it is installed correctly.
• Make sure the Paper Size setting in the Paper menu is correct.
• Make sure the margins are set correctly in your program.
• Make sure the Paper Type setting in the Paper menu is correct.
• Replace the photoconductor kit.
• The Toner Darkness setting may be too dark. Change the Toner Darkness setting in
the Quality menu.
• Adjust the Brightness to a darker setting.
• Adjust the Contrast to a darker setting.
• The photoconductor kit may be defective.
Replace the photoconductor kit.
Adjust the paper guides to the proper positions for the loaded print media size.
• Use only transparencies recommended by the printer manufacturer.
• Make sure the Paper Type setting in the Paper menu is set to Transparency.
Solving print quality problems
57