Using The Anton Bauer Ultralight System - Sony HDW-730 Operation Manual

Using the AC-DN2B AC adaptor
Mount an AC-DN2B on the camcorder in the same way as a battery
pack, then connect to the AC power supply. The AC-DN2B can supply
up to 150 W of power.
AC-DN2B
5
to wall outlet
Connecting to an AC power source using the AC-DN2B AC Adaptor

5-1-4 Using the Anton Bauer Ultralight System

By fitting the camcorder with the Anton Bauer Ultralight system, and
setting the LIGHT switch to AUTO, you can switch the light on and off
automatically as you start and stop VTR operation. This system operates
with lights powered by 12 V, with a maximum power consumption of
50 W.
5-6
Chapter 5 Setting Up the Camcorder