Sony HDW-730 Operation Manual page 99

Setting the Auto Interval Rec mode
To record in Auto Interval Rec mode, you need to turn on Auto Interval
Rec and set the total time from starting to finishing shooting (TAKE
TOTAL TIME) and time to be recorded on the tape (REC TIME), using
the USER menu.
Notes
• To make settings for Auto Interval Rec mode, set TAKE TOTAL
TIME first, then REC TIME.
• To turn on the light automatically before starting recording by setting
the PRE-LIGHTING item to ON, be sure to set the LIGHT switch to
AUTO. Also, set the switch of the light connected to the LIGHT
connector to on.
Follow the procedure below to turn on Auto Interval Rec mode
MENU knob
Switches to be used for setting the Auto Interval Rec mode
1
Set the MENU ON/OFF switch to ON.
The page that was on the viewfinder screen when the last menu
operation ended will appear again.
MENU ON/OFF switch
Chapter 3 Recording and Playback
3
(Continued)
3-29