Sony HDW-730 Operation Manual page 127

When using an HKDW-702 extension board (not supplied) for
down converting
Connect the color video monitor to the TEST OUT connector or VBS/
SDI OUT connector of the camcorder (when an HKDW-702 is
installed). By pressing the PLAY button, you can view the recorded
picture.
The signal output from each connector depends on the menu settings.
For detailed information, see "4-8-2 Selecting the Output Signals" on page 4-101.
NTSC/PAL monitor
Video input
connector b)
a) As the output signal from the VBS/SDI OUT connector, when
SDI is selected on the OUTPUT SEL page of the USER
menu, connect to the SDI input connector. When VBS is
selected, connect to the video input connector.
Note
When REAR BNC OUT SEL is set to OFF on the OUTPUT
SEL page of the USER menu, the signal is not output from
the VBS/SDI OUT connector.
For detailed information, see "4-8-2 Selecting the Output
Signals" on page 4-101.
b) When SD is selected as the output signal from the TEST
OUT connector, connect to the video input connector.
HDW-730/750/750P
SDI input
connector or
video input
connector a)
a)
VBS/SDI OUT
Color playback
Chapter 3 Recording and Playback
TEST OUT b)
3
3-57