Example 2: Interconnecting a number of camcorders for time code
synchronization
GENLOCK IN
To another camcorder to be
synchronized
a) When an HKDW-702 (not supplied) is installed, the down-converted
video signal of the camcorder cannot be used as the reference signal.
When interconnecting a number of camcorders, output the HD analog
component signal (HD-Y signal) from the TEST OUT connector.
For details, see "4-8-2 Selecting the Output Signals" on page 4-101.
b) Set GENLOCK to ON on the GENLOCK page of the MAINTENANCE
menu.
a)
TEST OUT
TC OUT
TC IN
b)
TC OUT
TEST OUT
a)
GENLOCK IN
b)
TC IN
TC OUT
TEST OUT
a)
Chapter 4 Adjustments and Settings for Recording
Reference camcorder
4-41
4