Sony HDW-730 Operation Manual page 314

Fitting the WRR-860A (Using a BP-L60A Battery Pack)
1
(1) Attach the WRR tuner fitting (not supplied, service part number:
A-8278-057-A) to the back of the camcorder.
1 Pass a screwdriver through the holes and tighten the screws.
2 Loosen the adjustment screws.
3 Adjust the tuner fitting position for a BP-L60A Battery
4 Attach the BETACAM holder kit supplied with the tuner.
(2) Attach the battery pack.
5 For more information about attaching the BP-L60A Battery Pack, see
"5-1-1 Using a BP-L60A Battery Pack" on page 5-1.
5-26
Chapter 5 Setting Up the Camcorder
Pack to be attached, and tighten the adjustment screws to
fix its position.
Back of camcorder
Adjustment screws
WRR tuner fitting
BP-L60A
BETACAM
holder kit
Holes