Sony HDW-730 Operation Manual page 249

Function
MARKER ON/OFF
ZEBRA ON/OFF
a) Even when MARKER is set to OFF on the MARKER page of
the USER menu, the ASSIGN 2 switch allows you to display or
not to display all markers.
Note
For functions that are assigned to the ASSIGN 2 switch, you cannot
change those settings using other menus. The function assigned to
ASSIGN 2 switch takes precedence over the menu setting.
4
Turn the MENU knob to move the t mark to the item you want to
set, and push the MENU knob.
The t mark at the left of the selected item changes to a z mark
and the z mark at the left of the setting changes to a ? mark.
5
Turn the MENU knob to change the desired setting, and push the
MENU knob.
The z mark at the left of the selected item changes to a t mark
and the ? mark at the left of the setting changes to a z mark.
6
To continue another setting, repeat steps 4 and 5.
To return to the FUNCTION 1 page
Turn the MENU knob to move the t mark to ESC on the right top of
the window and push the MENU knob.
Or push the CANCEL/PRST / ESCAPE switch down to the ESCAPE
side.
Content
Assigns the ON/OFF function to display all
a)
markers.
Assigns the zebra pattern display function
to the switch.
Chapter 4 Adjustments and Settings for Recording
4
4-113