Sony HDW-730 Operation Manual page 162

5
Turn the MENU knob until the desired auto iris window appears,
then push the MENU knob.
The shaded parts in the illustrations indicate the area where
light detection occurs.
4
The z mark at the left of the selected item changes to a t mark
and the ? mark at the left of the setting changes to a z mark.
If you select VARIABLE, the following items become effective and
you can set the window of the desired size.
Set each item to the desired size.
Item
IRIS VAR WIDTH
IRIS VAR HEIGHT
IRIS VAR H POS
IRIS VAR V POS
6
Set the MENU ON/OFF switch to OFF. Or close the cover of the
Menu Operating section.
The menu disappears from the viewfinder screen and the display
indicating the current status of the camcorder appears along the top
and bottom of the viewfinder.
4-26
Chapter 4 Adjustments and Settings for Recording
Auto iris window
Setting
The width of the window
The height of the window
The position of the window in the horizontal
direction
The position of the window in the vertical
direction