Using The Anton Bauer Ultralight System - Sony HDW-700A Operation Manual

5-1-5 Using the Anton Bauer Ultralight System

You can equip the camcorder with a special battery mount that the Anton
Bauer Corporation has developed for its Ultralight System.
Ultralight System: By installing this system on the camcorder, you can
switch the video light on and off automatically as you start and stop
VTR operation, using the VTR START button on the camcorder or
the VTR button on the lens.
Contact your Sony representative for more information.
When the internal battery (Anton Bauer) begins to fail during
use
Follow the procedure below to change the battery.
1
Set the battery to LITHIUM on the OPERATION menu.
For more information about selecting the battery, see Section 4-7-8 "Setting the
Battery, D5600K Mode and Selecting the Lens File" (page 4-50).
2
Connect a fully charged external battery to the DC IN connector,
and change the internal battery.
3
Remove the external battery connection, then return the battery
setting to ANTON.
Chapter 5 Setting Up the Camcorder
5
5-7