Sony HDW-730 Operation Manual page 54

4 MENU ON/OFF (menu display) switch
To use this switch, open the cover.
This switch is used to display the menu on the viewfinder screen or the
2
test signal screen. Closing the cover results in automatically setting this
switch to OFF.
ON: Displays the menu on the viewfinder screen or the test signal
screen, at the page which was on the screen when the previous menu
access ended. (When the menu is first used, the first page is
displayed.)
OFF: Removes the menu from the viewfinder screen or the test signal
screen.
5 CANCEL/PRST / ESCAPE (menu setting cancellation/menu
presetting/returning page) switch
To enable this switch, set the MENU ON/OFF switch to ON.
Closing the cover automatically sets the MENU ON/OFF switch to OFF.
CANCEL/PRST: Pushing this switch up to this position displays the
message to confirm whether the previous settings are cancelled or
settings are reset to their initial values, depending on the menu
operating condition.
Pushing this switch up to this position again cancels the previous
settings or resets the settings to their initial values.
ESCAPE: Use this switch when the menu page, which has a hierarchical
structure, is opened. Each time the switch is pushed to this position,
the page returns to one stage higher in the hierarchy.
2-32
Chapter 2 Locations and Functions of Parts and Controls