Removing The System Board Shield; Installing A Memory Card - Lexmark E220 Setup Manual

Removing the system board shield

Installing a memory card

Install memory cards
10
Use a No. 2 Phillips screwdriver to
remove the system board shield.
1
Remove the top screw and set it
aside.
2
Loosen the bottom three screws,
but do not remove them.
3
Slide the system board shield
along the top and bottom grooves
and set it aside.
Follow the instructions in this section to
install a printer memory card.
The system board has two connectors for
optional memory cards. You can install a
card in either connector.