Lexmark E220 Setup Manual page 18

Warning:
Memory cards are easily damaged by static
electricity. Touch something metal on the printer before
you touch a memory card.
Notches
Latch
Connection points
Latch
Install memory cards
11
1
Complete the steps in "Removing
the system board shield" on
page 10.
2
Unpack the printer memory card.
Avoid touching the connection
points along the edge of the card.
Save the packaging.
3
Align the notches on the bottom of
the card with the notches on the
connector.
4
Guide the card between the
latches on each end of the
connector and push the card firmly
into the connector.
5
Make sure each latch fits over the
notch on each end of the memory
card.
6
Reattach the metal shield and side
cover. See page 12 for
instructions.