Lexmark E220 Setup Manual page 36

Using Windows 98
with a USB or
parallel cable
Note:
Depending on the
software and printers
already installed on your
computer, your screens may
vary from those in the
instructions.
5
Select your printer and driver from the list, and then click OK.
Make sure you select the driver in the correct language you
want to use.
D:\Drivers\WIN_9X\<LANGUAGE>
6
After the printer driver is installed, click Finish.
7
Use the default printer name or type a unique name for your
printer, and then click Next.
8
Click Yes (recommended), and then click Finish to print a test
page.
9
After the test page prints, click Yes to close the window.
10
Click Finish to complete the installation and close the wizard.
You are now ready to print.
You must install both a USB port driver and an enhanced custom print
driver.
When the Add New Hardware Wizard screen appears:
1
Insert the drivers CD, and then click Next. If the CD auto
launches, exit the CD.
2
Select Search for the best driver for your device
(recommended), and then click Next.
3
Select only CD-ROM drive, and then click Next.
4
After the wizard finds the USB port driver, click Finish.
5
Select To install the updated driver (recommended), and
then click Next.
6
Select Specify a location and browse to the location of the
printer driver on the drivers CD, and then click OK.
D:\Drivers\WIN_9X\<language>
7
Select To install the updated driver (recommended), and
then click Next.
8
After the printer driver is installed, click Finish.
9
Use the default printer name or type a unique name for your
printer, and then click Next.
Install drivers for local printing
29