Memory full
Light sequence:
•
Continue—On
•
Ready—On
•
Toner Low/Replace PC Kit—On
•
Error—On
What this light sequence means:
The printer is processing data, but the memory used to store
pages is full.
What you can do:
•
Press Continue
printing the job (the job may not print correctly).
•
Press and release Cancel
•
Press and hold Cancel
•
To avoid this error in the future:
–
Simplify the print job. Reduce the complexity of the
page by reducing the amount of text or graphics on
the page and deleting unnecessary downloaded
fonts or macros.
–
Install additional printer memory (see Adding a
memory card on page 72).
Short paper
Light sequence:
•
Continue—On
•
Ready—On
•
Load Paper—On
•
Error—On
What this light sequence means:
The paper length is too short to print the formatted data. This
occurs when the printer does not know the print media size loaded
in the tray, or there is a problem feeding the print media.
What you can do:
•
Make sure the print media you loaded is large enough.
•
Open the front door, clear the paper path, and close the
door to resume printing (see Clearing jams on
page 56).
•
Press Continue
printing the job.
•
Press Cancel
Understanding the control panel lights
to clear the message and continue
to cancel the print job.
to reset the printer.
to clear the code and continue
to cancel the print job.
33