Lexmark E 250d User Manual page 50

3
Adjust the rear paper guide for the print media size you will be loading.
Note: There should be a slight gap between the rear paper guide and the paper stack.
4
Insert the paper stack with the print side facing down.
Note: Make sure the paper stack is laying flat in the tray and is not above the maximum paper fill indicators.
Improper loading may cause jams.
Note: For simplex printing load letterhead paper with the design side facing down. The top edge of the sheet
with the logo should be placed at the front of the tray. For duplex printing load letterhead paper with
the design side facing up.
Loading the 250-sheet tray
50