Recognizing the control panel light sequences
The control panel displays certain light sequences to let you know when the toner level is low or when it's time to replace
the photoconductor kit.
= On
Printer Condition
Page
Toner low
16
Photoconductor kit
17
life warning
Replace
18
photoconductor
(printer hard stop)*
* If the control panel lights display this sequence, the printer will not print any more jobs until the photoconductor kit is
replaced.
Note: The control panel may also display other light sequences in conjunction with the "Toner low" and
"Replace photoconductor" lights.
Knowing when you need new supplies
= Blinking
Toner Low /
Continue
Error
Replace PC Kit
79
= Slow blink
Load Paper
Paper Jam
Empty = Off
Ready