Setup Menu - Lexmark C762 User Manual

Menu Item Purpose
Serial Buffer To configure the size of the serial input
buffer.
Note: Changing the Serial Buffer
menu item automatically resets the
printer.
Serial To select the hardware and software
handshaking values for the serial
Protocol
interface.

Setup Menu

Use the Setup Menu to configure a variety of printer features.
Note: Values marked by an asterisk (*) are the factory default settings.
Menu Item Purpose
Alarm
To establish whether the printer
sounds an alarm when the printer
Control
requires operator intervention.
Auto To define the amount of time (in
seconds) the printer waits after
Continue
displaying an operator intervention
error message before it resumes
printing.
Black & To set the printer to print only in black
and white.
White Lock
Values
Disabled Disables job buffering. Any jobs
already buffered on the disk are
printed before normal processing of
incoming jobs resumes.
Auto* Printer automatically calculates the
Serial Buffer size (recommended
setting).
3K to User specifies the Serial Buffer size.
maximum The maximum size depends on the
size allowed amount of memory in your printer, the
size of the other link buffers, and
whether Resource Save is set to On or
Off. To maximize the range for the
Serial Buffer size, disable or reduce
the size of the parallel and USB
buffers.
DTR* Hardware handshaking.
DTR/DSR Hardware handshaking.
XON/XOFF Software handshaking.
XON/XOFF/ Combined hardware and software
DTR handshaking.
XONXOFF/ Combined hardware and software
DTRDSR handshaking.
Values
Off Printer does not sound an alarm.
Single* Printer sounds three quick beeps.
Continuous Printer repeats three beeps every 10
seconds.
Disabled* Printer does not resume printing until
someone clears the error message.
5...255 Printer waits the specified amount of
time, and then automatically resumes
printing. This timeout value also
applies if the menus are displayed
(and the printer is offline) for the
specified period of time.
Off* Color prints as indicated in print job.
On The equivalent to setting Color Mode
to Black & White.
67