Printing information pages
Printing a font sample list
To print samples of the fonts currently available for your printer:
1
Make sure the printer is on and Ready appears.
2
From the printer control panel, press
3
Press the arrow buttons until Reports appears, and then press
4
Press the arrow buttons until Print Fonts appears, and then press
5
Press the arrow buttons until PCL Fonts, PostScript Fonts, or PPDS Fonts appears, and then
press
.
After the font sample list prints, Ready appears.
Printing a directory list
A directory list shows the resources stored in flash memory or on the hard disk.
1
Make sure the printer is on and Ready appears.
2
From the printer control panel, press
3
Press the arrow buttons until Reports appears, and then press
After the directory list prints, Ready appears.
Printing the print quality test pages
Print the print quality test pages to isolate print quality problems.
1
Turn the printer off.
2
Hold down
and the right arrow button while turning the printer on.
3
Release the buttons when the dots appear, and wait for CONFIG MENU to appear.
4
Press the arrow buttons until PRINT_QUAL_TXT appears, and then press
The print quality test pages print.
5
Press the arrow buttons until Exit Config Menu appears, and then press
Resetting the Printer appears briefly, and then Ready appears.
Canceling a print job from the printer control panel
1
Press
.
Stopped appears.
2
Press
.
.
.
Printing
60
.
.
.
.
.