Hex Trace; Invalid Engine Code - Lexmark C54x Series User Manual

Hex Trace

This message appears between status messages and warnings. Wait for the message to clear.
Imaging Kit
Replace the imaging kit, and then press
Insert Tray <x>
Insert the specified tray into the printer.

Invalid Engine Code

The engine code is invalid. Contact Customer Support.
Invalid Network Code
The network code is invalid. Contact Customer Support.
Load <src> with <custom type name>
Try one or more of the following:
•
Load the specified paper to clear the message and continue printing.
•
Press , and then press
Load <src> with <x>
Try one or more of the following:
•
Load the paper tray or other source with the correct paper type and size.
•
Press , and then press
Load single sheet feeder with <custom type name>
Try one or more of the following:
•
Load the manual feeder with the correct paper type and size.
If no paper is in the manual feeder, load a sheet, and then press
•
Press to clear the message and continue printing.
The printer manually overrides the manual request, and then the job prints from an automatic source.
•
Press , and then press
•
Define a name for each custom type (Custom 1–6) using the MarkVision utility. When the printer is prompting
for one of the custom types, which has been named, then only the custom name is displayed.
to clear the message and continue printing.
to cancel printing.
to cancel printing.
to cancel printing.
Understanding printer messages
102
to clear the message and continue printing.