Menu item
Copies
1–999
Blank Pages
Do Not Print
Print
Collate
On [1, 2, 1, 2, 1, 2]
Off [1, 1, 1, 2, 2, 2]
Separator Sheets
None
Between Copies
Between Jobs
Between Pages
Separator Source
Tray <x>
MP Feeder
Description
Specifies a default number of copies for each print job
Notes:
•
1 is the factory default setting.
•
To specify the number of copies for a specific print job from the software
program: click File
Options, or Setup and adjust the settings; for Macintosh users, click File >
Print, and then adjust the settings from the Print dialog and pop-up menus.
Software settings always override printer control panel settings.
Specifies whether blank pages are inserted in a print job
Note: Do Not Print is the factory default setting.
Stacks the pages of a print job in sequence when printing multiple copies
Notes:
•
Off is the factory default setting. No pages will be collated.
•
The On setting stacks the print job sequentially.
•
Both settings print the entire job the number of times specified by the Copy
menu setting.
Specifies whether blank separator sheets are inserted
Notes:
•
None is the factory default setting.
•
Between Copies inserts a blank sheet between each copy of a print job if
Collation is set to On. If Collation is set to Off, a blank page is inserted
between each set of printed pages, such as after all page 1's, all page 2's,
and so on.
•
Between Jobs inserts a blank sheet between print jobs.
•
Between Pages inserts a blank sheet between each page of the print job.
This setting is useful when printing transparencies or inserting blank pages
in a document for notes.
Specifies the paper source for separator sheets
Notes:
•
Tray 1 (standard tray) is the factory default setting.
•
From the Paper menu, Configure MP must be set to Cassette in order for
MP Feeder to appear as a menu setting.
Understanding printer menus
90
Print, and then click Properties, Preferences,