Load single sheet feeder with <custom string>
Try one or more of the following:
•
Load the manual feeder with the correct paper type and size.
If no paper is in the feeder, load a sheet, and then press
•
Select the paper type and size to manually override the manual request.
•
Press
, and then press
Load single sheet feeder with <size>
Try one or more of the following:
•
Load the manual feeder with the correct paper type and size.
If no paper is in the feeder, load a sheet of paper, and then press
•
Select the paper type and size to manually override the manual request.
•
Press
to clear the message and continue printing.
The printer manually overrides the manual request, and then paper prints from an automatic source.
•
Press
, and then press
Load single sheet feeder with <type> <size>
Try one or more of the following:
•
Load the manual feeder with the correct paper type and size.
If no paper is in the feeder, load a sheet, and then select
•
Press
to clear the message and continue printing.
The printer manually overrides the manual request, and then paper prints from an automatic source.
•
Press
, and then press
Output Bin Full
Try one or more of the following:
•
Remove paper from the standard exit bin to clear the message and continue printing.
•
Press
to clear the message and continue printing.
Power Saver
The printer is saving power while it waits for the next print job.
•
Send a job to print.
•
Press
to warm the printer to normal operating temperature. Afterwards, Ready appears.
Programming Code
The printer is receiving a file that is a code update. Wait for the message to clear.
Warning—Potential Damage: Do not turn the printer off while this message appears on the display.
to cancel printing.
to cancel printing.
to cancel printing.
Understanding printer messages
103
to clear the message and continue printing.
to clear the message and continue printing.
to clear the message and continue printing.