Using Windows Nt With A Parallel Cable - Lexmark C752 Setup Manual

Using Windows NT
with a parallel cable
Note:
USB support is not
available for Windows NT
operating systems.
Note:
You need
administrative access to
install printer drivers on your
computer.
Using Windows 95
with a parallel cable
Note:
USB support is not
available for Windows 95
operating systems.
The easiest way to install a driver is to use the drivers CD that shipped
with your printer.
1
Insert the drivers CD.
2
Click Install Printer and Software.
3
Click Printer.
4
Click Agree to accept the license agreement.
5
Select Quick Install, and then click Next.
6
Select the port you want to use, and then select the printer you
are installing.
7
Click Finish to complete the installation. You are now ready to
print.
When the Update Device Driver Wizard screen appears:
1
Insert the drivers CD. If the CD auto launches, exit the CD.
If a system-compatible driver is found on your operating system,
the Wizard installs it.
If no compatible system driver is found on your operating
system, click Other Locations.
2
Browse to the location of the printer driver on the drivers CD:
D:\drivers\win_9x\english
3
Click OK.
4
Click Finish. The Add Printer Wizard screen appears.
5
Use the default printer name or type a unique name for your
printer, and then click Next.
6
Click Yes to print a test page.
7
Click Finish. A test page is sent to the printer once the driver
files are copied to your computer. You are now ready to print.
Install drivers for local printing
48