Loading The Multipurpose Feeder - Lexmark C752 Setup Manual

Note:
Do not exceed the maximum stack height.
Overfilling the tray may cause jams.

Loading the multipurpose feeder

6
7
You can use the multipurpose feeder one
of two ways:
•
•
Load paper
36
Place the paper against the back
left corner of the tray, print side
down.
Do not load bent or wrinkled paper.
Close the tray.
Make sure the tray is pushed
completely into the printer.
Paper tray—As a paper tray, you
can load paper in the feeder with
the intention of leaving it in the
feeder.
Manual bypass feeder—As a
manual bypass feeder, you send a
print job to the feeder while
specifying the type and size of
media from your computer. The
printer then prompts you to load
the appropriate paper or specialty
media before it prints.