Horizon Fitness RST 5.6 Service Manual page 9

C o ns o l e /U p p e r B o a rd Tr o u b l e sh o o t in g C o nt i n u ed
Symptom
Running belt stops, console
resets during workout.
Fan Dosent Work at all or is
malfunctioning.
R S T5. 6 & R CT 7 . 6 S e a r s S e r v i c e M a n u a l 2 0 0 7
Possible Cause
Safety key or reed switch is
positioned incorrectly/ Safety
key is damaged.
Inadequate power.
Damaged or improper wiring.
Inadequate lubrication on
deck and running belt.
Failed Fan or Fan is
disconnected.
Test Procedure
-Verify that the safety key
is in position and that it is
secure.
-Check for dedicated circuit
(20 amp is ideal) and check
wall outlet voltage (120 VAC)
Reference Power Source
Wiring Diagram. (p. 20)
-Make sure machine is not
on extension cord or surge
protector.
-Verify there are no pinches or
cuts in the power cord, power
wires motor wires, or console
cable.
-Verify the connections of
above wires and cords
Reference Upper Board
Wiring Diagram.
(p. 18 & p. 19)
Place hand underneath
running belt and feel for
adequate silicone
application.
-Verify fan is seated properly
and not disconnected.
Reference Upper Board
Wiring Diagrams.
(p. 18 & p. 19)
rst 5.6 & rct 7.6 service manual 2007_rev1.0 |
Repair
Replace safety key.
If the AC voltage is missing
or incorrect, check the AC
service or consult an
electrician.
Replace parts as needed.
Apply silicone. Reference
Lubrication Procedure.
(p. 27)
If Fan is seated properly,
replace fan.