Lubrication Procedure - Horizon Fitness RST 5.6 Service Manual

EVERY 6 MONTHS OR 150 MILES
It is necessary to lubricate your treadmill running deck every six
months or 150 miles to maintain optimal performance of your
treadmill. Once the treadmill reaches 150 miles, the console
will prompt you to lubricate the treadmill. Only use lubricant
designated for treadmills; available by calling Sears at 1-800-4-
MY-HOME .
®
• TURN OFF THE TREADMILL with the on/off switch, then
unplug the power cord at the wall outlet.
• Loosen both the rear roller bolts. (For best results, place
two removable marks on both sides of the frame and note
roller position). Once the belt is loosened, take the bottle
of lubricant and apply it to the entire top surface of the
running deck. Tighten both rear roller bolts (matching up the
marks for proper position) to original position. After you have
applied lubricant, plug in the power cord, insert the safety
key, start the treadmill and walk on the belt for two minutes
to spread the lubricant.
• Lubricate the air shocks with Teflon based spray.
• Once lubrication is complete, reset the console by pressing
and holding 'STOP' and Speed '+' buttons for 5 seconds.
NOTE: The Treadmill will not operate when the message is
showing. You may hold STOP for 5 seconds to suspend
message for 5 miles.
R S T5. 6 & R CT 7 . 6 S e a r s S e r v i c e M a n u a l 2 0 0 7
L ub r ic a t io n P r o ce d u r e
L UB R ICAT ION
rst 5.6 & rct 7.6 service manual 2007_rev1.0 | 27